What is the difference between grinding fluid and cutting fluid?
Release time:
2022-06-22
The functions of cutting fluid in the process of metal cutting are: to reduce the friction between the tool and the difference between the grinding fluid and the cutting fluid of the workpiece, to form a lubricating oil film, to reduce the cutting force, friction and power consumption, the falling temperature and tool wear.
The functions of cutting fluid in the process of metal cutting are: to reduce the friction between the tool and the difference between the grinding fluid and the cutting fluid of the workpiece, to form a lubricating oil film, to reduce the cutting force, friction and power consumption, the falling temperature and tool wear. Take away the metal cutting together when cutting to ensure the accuracy and brightness of the surface of the workpiece. The cutting fluid is divided into mineral oil and half-composition. The cutting fluid made of mineral oil is usually emulsified and appears milky white. The half-composition cutting fluid is microemulsified and a little translucent.
All-component cutting fluid is a completely transparent mixed fluid. Lubricating performance: mineral oil > half-component cutting fluid > full-component cutting fluid. Cooling performance: full-component cutting fluid > half-component cutting fluid > mineral oil. So when choosing cutting fluid, it should be confirmed according to the detailed application requirements.
The primary functions of grinding fluid in the metal grinding process are: to form a lubricating oil film between the mold, workpiece and abrasive particles, reduce friction, prevent the grinding edge from sticking to the abrasive particles and falling wear, falling temperature, and reduce grinding force. Improve the service life of abrasives and improve the bright effect of the surface. Grinding fluid is also divided into mineral oil and full composition. The key consideration of ordinary grinding fluid is oily ability and anti-rust disposal ability. Ordinary grinding fluid and emulsion cutting fluid are universal. If it is a special requirement for fineness and high environmental protection requirements, try to use all-component grinding fluid.
Zibo Huanya Auxiliary Technology Co., Ltd.
Phone: +86-13615333567
E-mail: 770882607@qq.com
Add: Miaoshan Village, Yiyuan Economic Development Zone, Zibo
Copyright © 2026 Zibo Huanya Auxiliary Technology Co., Ltd.
国际站建设：中企动力 淄博 | 外贸谷歌推广 | SEO